Add DDI as an output for macro

[Oldrego]

Problem

I want to set a combination of keys to output a DDI for the right analog. For example, Macro+10 → DDI Left, Macro+11→ DDI Down, Macro+12 → DDI Right, Macro+19→ DDI Up. Currently there is no way to output DDI. Even if I map DDI to a set of open pins, I can't have macro output a pin.

There is no way to add DDI as an output for Hotkeys either. It would be even easier if Function+10 → DDI Left, Function+11→DDI Down, etc.

Solution

Allow for DDI Up, DDI Down, DDI Left, and DDI Right to be able to be outputs for a macro and Hotkey, so that Macro+Pin→DDI, and Function+Pin→DDI.

[Oldrego]

Another option is to allow for the tilt input add-on to allow for combinations of pins for Tilt Left Analog _ Pin and Tilt Right Analog _ Pin. For example, Tilt Right Analog Up Pin could be mapped to PIN 18 + PIN 19. So long as all pins assigned in the tilt add-on are not bound to anything else, and there is no duplicate combinations of pins, it would work fine.

This would be a separate thing from DDI being an output of Macros or Hotkeys, though.