diff --git a/octoprint_file_check/translations/de/LC_MESSAGES/messages.mo b/octoprint_file_check/translations/de/LC_MESSAGES/messages.mo index ba8d17c..7f2a759 100644 Binary files a/octoprint_file_check/translations/de/LC_MESSAGES/messages.mo and b/octoprint_file_check/translations/de/LC_MESSAGES/messages.mo differ diff --git a/octoprint_file_check/translations/de/LC_MESSAGES/messages.po b/octoprint_file_check/translations/de/LC_MESSAGES/messages.po index 11f74a3..0d9d33b 100644 --- a/octoprint_file_check/translations/de/LC_MESSAGES/messages.po +++ b/octoprint_file_check/translations/de/LC_MESSAGES/messages.po @@ -6,53 +6,203 @@ # msgid "" msgstr "" -"Project-Id-Version: OctoPrint-FileCheck 2020.6.22\n" +"Project-Id-Version: OctoPrint-FileCheck 2024.3.27\n" "Report-Msgid-Bugs-To: i18n@octoprint.org\n" -"POT-Creation-Date: 2020-06-22 16:22+0200\n" -"PO-Revision-Date: 2020-06-22 17:13+0200\n" +"POT-Creation-Date: 2024-03-26 14:08+0100\n" +"PO-Revision-Date: 2024-03-26 14:08+0100\n" +"Last-Translator: \n" "Language: de\n" "Language-Team: de \n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" -"Generated-By: Babel 2.8.0\n" -"Last-Translator: \n" -"X-Generator: Poedit 2.0.4\n" +"Generated-By: Babel 2.12.1\n" -#: octoprint_file_check/__init__.py:103 +#: build/lib/octoprint_file_check/__init__.py:138 +#: octoprint_file_check/__init__.py:421 +#, fuzzy msgid "" -"Without this plugin OctoPrint will no longer be able to check if " -"uploaded files contain common the printer it is connected to has a " -"known safety issue or otherwise broken firmware and inform you about " -"that fact." +"Without this plugin OctoPrint will no longer be able to check if uploaded" +" files contain common problems and inform you about that fact." msgstr "" "Ohne dieses Plugin wird OctoPrint nicht länger in der Lage sein, zu " "prüfen, ob eine hochgeladene Datei typische Probleme enthält und ggf. " "davor zu warnen." -#: octoprint_file_check/static/js/file_check.js:12 +#: build/lib/octoprint_file_check/static/js/file_check.js:12 msgid "" -"Your sliced file still contains a place holder {travel_speed}. This is a common issue when using old start/stop GCODE code " -"snippets in current versions of Cura, as the placeholder name switched " -"to {speed_travel} at some point and no longer gets replaced " -"in current versions. You need to fix this in your slicer and reslice " -"your file, do not print it like it is as it will cause issues!" +"Your sliced file still contains a place holder " +"{travel_speed}. This is a common issue when using old " +"start/stop GCODE code snippets in current versions of Cura, as the " +"placeholder name switched to {speed_travel} at some point " +"and no longer gets replaced in current versions. You need to fix this in " +"your slicer and reslice your file, do not print it like it is as it will " +"cause issues!" msgstr "" -"Deine geslicete Datei beinhaltet den Platzhalter {travel_speed}. Das ist ein häufiges Problem wenn alter start/stop GCODE in " -"aktuellen Versionen von Cura verwendet wird, da der Platzhaltername vor " -"einiger Zeit zu {speed_travel} geändert wurde und die alte " -"Variante in aktuellen Versionen nicht mehr ersetzt wird. Du musst das in " -"deinem Slicer fixen und deine Datei erneut slicen. Versuche sie nicht so " -"zu drucken, das wird Probleme verursachen!" +"Deine geslicete Datei beinhaltet den Platzhalter " +"{travel_speed}. Das ist ein häufiges Problem wenn alter " +"start/stop GCODE in aktuellen Versionen von Cura verwendet wird, da der " +"Platzhaltername vor einiger Zeit zu {speed_travel} geändert " +"wurde und die alte Variante in aktuellen Versionen nicht mehr ersetzt " +"wird. Du musst das in deinem Slicer fixen und deine Datei erneut slicen. " +"Versuche sie nicht so zu drucken, das wird Probleme verursachen!" -#: octoprint_file_check/static/js/file_check.js:31 +#: build/lib/octoprint_file_check/static/js/file_check.js:35 +#: octoprint_file_check/static/js/file_check.js:156 +#: octoprint_file_check/static/js/file_check.js:221 msgid "Read more..." msgstr "Mehr..." -#: octoprint_file_check/static/js/file_check.js:34 +#: build/lib/octoprint_file_check/static/js/file_check.js:40 #, python-format msgid "File Check detected issues with %(storage)s:%(path)s!" msgstr "File Check hat Probleme mit %(storage)s:%(path)s festgestellt!" + +#: octoprint_file_check/__init__.py:160 +msgid "Allows to run File Check and view the results." +msgstr "Erlaubt das Ausführen von File Check und das Anzeigen der Ergebnisse." + +#: octoprint_file_check/static/js/file_check.js:21 +msgid "" +"Your file still contains a place holder {travel_speed}. This" +" is a common issue when using old start/stop GCODE code snippets in " +"current versions of Cura, as the placeholder name switched to " +"{speed_travel} at some point and no longer gets replaced in " +"current versions. You need to fix this in your slicer and reslice your " +"file, do not print it like it is as it will cause issues!" +msgstr "" +"Deine geslicete Datei beinhaltet den Platzhalter " +"{travel_speed}. Das ist ein häufiges Problem wenn alter " +"start/stop GCODE in aktuellen Versionen von Cura verwendet wird, da der " +"Platzhaltername vor einiger Zeit zu {speed_travel} geändert " +"wurde und die alte Variante in aktuellen Versionen nicht mehr ersetzt " +"wird. Du musst das in deinem Slicer fixen und deine Datei erneut slicen. " +"Versuche sie nicht so zu drucken, das wird Probleme verursachen!" + +#: octoprint_file_check/static/js/file_check.js:30 +msgid "" +"Your file contains an API key that is not supposed to be there. This is " +"caused by a bug in your slicer, and known to happen with PrusaSlicer (<= " +"2.1.1), BambuStudio (<= 1.8.4) and OrcaSlicer (<= 1.9.0). Do not share " +"this file with anyone, update your slicer to a patched version " +"immediately, and reslice your file. Also consider changing your API key " +"in OctoPrint, as it might have been leaked by your slicer to third " +"parties through any GCODE files shared previously." +msgstr "" +"Deine geslicete Datei beinhaltet einen API Schlüssel, der dort nicht " +"sein sollte. Das wird durch einen Bug in deinem Slicer verursacht und " +"ist bekannt bei PrusaSlicer (<= 2.1.1), BambuStudio (<= 1.8.4) und " +"OrcaSlicer (<= 1.9.0). Teile diese Datei nicht mit anderen, aktualisiere " +"deinen Slicer sofort auf eine gepatchte Version und slice die Datei " +"erneut. Überlege auch, deinen API Schlüssel in OctoPrint zu ändern, da " +"er durch deinen Slicer in vorher geteilten GCODE Dateien an Dritte " +"weitergegeben worden sein könnte." + +#: octoprint_file_check/static/js/file_check.js:44 +msgid "unknown" +msgstr "unbekannt" + +#: octoprint_file_check/static/js/file_check.js:50 +msgid "Current set of checks" +msgstr "Aktuelle Liste von Checks" + +#: octoprint_file_check/static/js/file_check.js:52 +msgid "Outdated set of checks" +msgstr "Veraltete Liste von Checks" + +#: octoprint_file_check/static/js/file_check.js:90 +msgid "Run File Check on all files?" +msgstr "File Check auf allen Dateien ausführen?" + +#: octoprint_file_check/static/js/file_check.js:91 +msgid "" +"This will perform a check of all of your uploaded files for known issues." +" Depending on the amount of files this could take several minutes. It " +"should not be done while a print is running." +msgstr "" +"Das wird eine Prüfung aller deiner hochgeladenen Dateien auf bekannte " +"Probleme durchführen. Abhängig von der Anzahl der Dateien kann das " +"mehrere Minuten dauern. Es sollte nicht während eines Drucks gemacht " +"werden." + +#: octoprint_file_check/static/js/file_check.js:161 +msgid "File Check detected the following issues:" +msgstr "File Check hat folgende Probleme festgestellt:" + +#: octoprint_file_check/static/js/file_check.js:241 +msgid "File Check detected issues with %(path)s!" +msgstr "File Check hat Probleme mit %(path)s festgestellt!" + +#: octoprint_file_check/static/js/file_check.js:269 +#: octoprint_file_check/static/js/file_check.js:302 +msgid "File Check detected issues with this file!" +msgstr "File Check hat Probleme mit dieser Datei festgestellt!" + +#: octoprint_file_check/templates/file_check_settings.jinja2:1 +msgid "File Check" +msgstr "File Check" + +#: octoprint_file_check/templates/file_check_settings.jinja2:3 +msgid "" +"\n" +" The bundled File Check plugin allows checking your uploaded files for" +" known slicer misconfigurations and related issues.\n" +" The plugin automatically checks all freshly uploaded files and files " +"selected for printing, but for already uploaded\n" +" files you can also trigger a full file check manually. It is " +"recommended to do this whenever new checks are added\n" +" to the plugin, in which case your last check will be marked as " +"outdated below.\n" +msgstr "" +"\n" +" Das gebündelte File Check Plugin erlaubt das Prüfen deiner hochgeladenen" +" Dateien auf bekannte Slicer Fehlkonfigurationen und\n" +" damit zusammenhängende Probleme. Das Plugin prüft automatisch alle " +"frisch hochgeladenen Dateien und Dateien, die zum Druck\n" +" ausgewählt wurden, aber für bereits hochgeladene Dateien" +"kannst du auch manuell einen vollständigen Datei-Check\n" +" auslösen. Es wird empfohlen, dies zu tun, wann immer neue Checks zum " +"Plugin hinzugefügt werden, in welchem Fall dein letzter Check\n" +" unten als veraltet markiert wird.\n" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:1 +msgid "A full File Check is suggested" +msgstr "Ein vollständiger File Check wird empfohlen" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:3 +msgid "" +"\n" +" The bundled File Check plugin has been updated with new high priority" +" checks. It is recommended to run a \n" +" full file check now to ensure that you are aware of any critical " +"issues in your uploaded files. Depending on the \n" +" size of your upload folder, this may take several minutes.\n" +msgstr "" +"\n" +" Das gebündelte File Check Plugin wurde mit neuen hochpriorisierten " +"Checks aktualisiert. Es wird empfohlen, jetzt einen vollständigen\n" +" Datei-Check durchzuführen, um sicherzustellen, dass du über kritische " +"Probleme in deinen hochgeladenen Dateien informiert bist. Abhängig\n" +" von der Größe deines Upload-Ordners kann das mehrere Minuten dauern.\n" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:9 +msgid "" +"\n" +" You can run a full file check by clicking the button below or " +"alternatively at any time from the\n" +" File Check plugin settings.\n" +msgstr "" +"\n" +" Du kannst einen vollständigen Datei-Check durchführen, indem du auf " +"den unten stehenden Button klickst oder alternativ jederzeit\n" +" über die Einstellungen des File Check Plugins.\n" + +#: octoprint_file_check/templates/snippets/fileCheckButton.jinja2:1 +msgid "Run full file check now" +msgstr "Vollständigen File Check jetzt ausführen" + +#: octoprint_file_check/templates/snippets/fileCheckButton.jinja2:3 +msgid "Last check:" +msgstr "Letzter check:" + diff --git a/setup.py b/setup.py index 7723595..35e0d9c 100644 --- a/setup.py +++ b/setup.py @@ -12,7 +12,7 @@ plugin_name = "OctoPrint-FileCheck" # The plugin's version. Can be overwritten within OctoPrint's internal data via __plugin_version__ in the plugin module -plugin_version = "2021.2.23" +plugin_version = "2024.3.27" # The plugin's description. Can be overwritten within OctoPrint's internal data via __plugin_description__ in the plugin # module diff --git a/translations/de/LC_MESSAGES/messages.mo b/translations/de/LC_MESSAGES/messages.mo index ba8d17c..7f2a759 100644 Binary files a/translations/de/LC_MESSAGES/messages.mo and b/translations/de/LC_MESSAGES/messages.mo differ diff --git a/translations/de/LC_MESSAGES/messages.po b/translations/de/LC_MESSAGES/messages.po index 11f74a3..0d9d33b 100644 --- a/translations/de/LC_MESSAGES/messages.po +++ b/translations/de/LC_MESSAGES/messages.po @@ -6,53 +6,203 @@ # msgid "" msgstr "" -"Project-Id-Version: OctoPrint-FileCheck 2020.6.22\n" +"Project-Id-Version: OctoPrint-FileCheck 2024.3.27\n" "Report-Msgid-Bugs-To: i18n@octoprint.org\n" -"POT-Creation-Date: 2020-06-22 16:22+0200\n" -"PO-Revision-Date: 2020-06-22 17:13+0200\n" +"POT-Creation-Date: 2024-03-26 14:08+0100\n" +"PO-Revision-Date: 2024-03-26 14:08+0100\n" +"Last-Translator: \n" "Language: de\n" "Language-Team: de \n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" -"Generated-By: Babel 2.8.0\n" -"Last-Translator: \n" -"X-Generator: Poedit 2.0.4\n" +"Generated-By: Babel 2.12.1\n" -#: octoprint_file_check/__init__.py:103 +#: build/lib/octoprint_file_check/__init__.py:138 +#: octoprint_file_check/__init__.py:421 +#, fuzzy msgid "" -"Without this plugin OctoPrint will no longer be able to check if " -"uploaded files contain common the printer it is connected to has a " -"known safety issue or otherwise broken firmware and inform you about " -"that fact." +"Without this plugin OctoPrint will no longer be able to check if uploaded" +" files contain common problems and inform you about that fact." msgstr "" "Ohne dieses Plugin wird OctoPrint nicht länger in der Lage sein, zu " "prüfen, ob eine hochgeladene Datei typische Probleme enthält und ggf. " "davor zu warnen." -#: octoprint_file_check/static/js/file_check.js:12 +#: build/lib/octoprint_file_check/static/js/file_check.js:12 msgid "" -"Your sliced file still contains a place holder {travel_speed}. This is a common issue when using old start/stop GCODE code " -"snippets in current versions of Cura, as the placeholder name switched " -"to {speed_travel} at some point and no longer gets replaced " -"in current versions. You need to fix this in your slicer and reslice " -"your file, do not print it like it is as it will cause issues!" +"Your sliced file still contains a place holder " +"{travel_speed}. This is a common issue when using old " +"start/stop GCODE code snippets in current versions of Cura, as the " +"placeholder name switched to {speed_travel} at some point " +"and no longer gets replaced in current versions. You need to fix this in " +"your slicer and reslice your file, do not print it like it is as it will " +"cause issues!" msgstr "" -"Deine geslicete Datei beinhaltet den Platzhalter {travel_speed}. Das ist ein häufiges Problem wenn alter start/stop GCODE in " -"aktuellen Versionen von Cura verwendet wird, da der Platzhaltername vor " -"einiger Zeit zu {speed_travel} geändert wurde und die alte " -"Variante in aktuellen Versionen nicht mehr ersetzt wird. Du musst das in " -"deinem Slicer fixen und deine Datei erneut slicen. Versuche sie nicht so " -"zu drucken, das wird Probleme verursachen!" +"Deine geslicete Datei beinhaltet den Platzhalter " +"{travel_speed}. Das ist ein häufiges Problem wenn alter " +"start/stop GCODE in aktuellen Versionen von Cura verwendet wird, da der " +"Platzhaltername vor einiger Zeit zu {speed_travel} geändert " +"wurde und die alte Variante in aktuellen Versionen nicht mehr ersetzt " +"wird. Du musst das in deinem Slicer fixen und deine Datei erneut slicen. " +"Versuche sie nicht so zu drucken, das wird Probleme verursachen!" -#: octoprint_file_check/static/js/file_check.js:31 +#: build/lib/octoprint_file_check/static/js/file_check.js:35 +#: octoprint_file_check/static/js/file_check.js:156 +#: octoprint_file_check/static/js/file_check.js:221 msgid "Read more..." msgstr "Mehr..." -#: octoprint_file_check/static/js/file_check.js:34 +#: build/lib/octoprint_file_check/static/js/file_check.js:40 #, python-format msgid "File Check detected issues with %(storage)s:%(path)s!" msgstr "File Check hat Probleme mit %(storage)s:%(path)s festgestellt!" + +#: octoprint_file_check/__init__.py:160 +msgid "Allows to run File Check and view the results." +msgstr "Erlaubt das Ausführen von File Check und das Anzeigen der Ergebnisse." + +#: octoprint_file_check/static/js/file_check.js:21 +msgid "" +"Your file still contains a place holder {travel_speed}. This" +" is a common issue when using old start/stop GCODE code snippets in " +"current versions of Cura, as the placeholder name switched to " +"{speed_travel} at some point and no longer gets replaced in " +"current versions. You need to fix this in your slicer and reslice your " +"file, do not print it like it is as it will cause issues!" +msgstr "" +"Deine geslicete Datei beinhaltet den Platzhalter " +"{travel_speed}. Das ist ein häufiges Problem wenn alter " +"start/stop GCODE in aktuellen Versionen von Cura verwendet wird, da der " +"Platzhaltername vor einiger Zeit zu {speed_travel} geändert " +"wurde und die alte Variante in aktuellen Versionen nicht mehr ersetzt " +"wird. Du musst das in deinem Slicer fixen und deine Datei erneut slicen. " +"Versuche sie nicht so zu drucken, das wird Probleme verursachen!" + +#: octoprint_file_check/static/js/file_check.js:30 +msgid "" +"Your file contains an API key that is not supposed to be there. This is " +"caused by a bug in your slicer, and known to happen with PrusaSlicer (<= " +"2.1.1), BambuStudio (<= 1.8.4) and OrcaSlicer (<= 1.9.0). Do not share " +"this file with anyone, update your slicer to a patched version " +"immediately, and reslice your file. Also consider changing your API key " +"in OctoPrint, as it might have been leaked by your slicer to third " +"parties through any GCODE files shared previously." +msgstr "" +"Deine geslicete Datei beinhaltet einen API Schlüssel, der dort nicht " +"sein sollte. Das wird durch einen Bug in deinem Slicer verursacht und " +"ist bekannt bei PrusaSlicer (<= 2.1.1), BambuStudio (<= 1.8.4) und " +"OrcaSlicer (<= 1.9.0). Teile diese Datei nicht mit anderen, aktualisiere " +"deinen Slicer sofort auf eine gepatchte Version und slice die Datei " +"erneut. Überlege auch, deinen API Schlüssel in OctoPrint zu ändern, da " +"er durch deinen Slicer in vorher geteilten GCODE Dateien an Dritte " +"weitergegeben worden sein könnte." + +#: octoprint_file_check/static/js/file_check.js:44 +msgid "unknown" +msgstr "unbekannt" + +#: octoprint_file_check/static/js/file_check.js:50 +msgid "Current set of checks" +msgstr "Aktuelle Liste von Checks" + +#: octoprint_file_check/static/js/file_check.js:52 +msgid "Outdated set of checks" +msgstr "Veraltete Liste von Checks" + +#: octoprint_file_check/static/js/file_check.js:90 +msgid "Run File Check on all files?" +msgstr "File Check auf allen Dateien ausführen?" + +#: octoprint_file_check/static/js/file_check.js:91 +msgid "" +"This will perform a check of all of your uploaded files for known issues." +" Depending on the amount of files this could take several minutes. It " +"should not be done while a print is running." +msgstr "" +"Das wird eine Prüfung aller deiner hochgeladenen Dateien auf bekannte " +"Probleme durchführen. Abhängig von der Anzahl der Dateien kann das " +"mehrere Minuten dauern. Es sollte nicht während eines Drucks gemacht " +"werden." + +#: octoprint_file_check/static/js/file_check.js:161 +msgid "File Check detected the following issues:" +msgstr "File Check hat folgende Probleme festgestellt:" + +#: octoprint_file_check/static/js/file_check.js:241 +msgid "File Check detected issues with %(path)s!" +msgstr "File Check hat Probleme mit %(path)s festgestellt!" + +#: octoprint_file_check/static/js/file_check.js:269 +#: octoprint_file_check/static/js/file_check.js:302 +msgid "File Check detected issues with this file!" +msgstr "File Check hat Probleme mit dieser Datei festgestellt!" + +#: octoprint_file_check/templates/file_check_settings.jinja2:1 +msgid "File Check" +msgstr "File Check" + +#: octoprint_file_check/templates/file_check_settings.jinja2:3 +msgid "" +"\n" +" The bundled File Check plugin allows checking your uploaded files for" +" known slicer misconfigurations and related issues.\n" +" The plugin automatically checks all freshly uploaded files and files " +"selected for printing, but for already uploaded\n" +" files you can also trigger a full file check manually. It is " +"recommended to do this whenever new checks are added\n" +" to the plugin, in which case your last check will be marked as " +"outdated below.\n" +msgstr "" +"\n" +" Das gebündelte File Check Plugin erlaubt das Prüfen deiner hochgeladenen" +" Dateien auf bekannte Slicer Fehlkonfigurationen und\n" +" damit zusammenhängende Probleme. Das Plugin prüft automatisch alle " +"frisch hochgeladenen Dateien und Dateien, die zum Druck\n" +" ausgewählt wurden, aber für bereits hochgeladene Dateien" +"kannst du auch manuell einen vollständigen Datei-Check\n" +" auslösen. Es wird empfohlen, dies zu tun, wann immer neue Checks zum " +"Plugin hinzugefügt werden, in welchem Fall dein letzter Check\n" +" unten als veraltet markiert wird.\n" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:1 +msgid "A full File Check is suggested" +msgstr "Ein vollständiger File Check wird empfohlen" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:3 +msgid "" +"\n" +" The bundled File Check plugin has been updated with new high priority" +" checks. It is recommended to run a \n" +" full file check now to ensure that you are aware of any critical " +"issues in your uploaded files. Depending on the \n" +" size of your upload folder, this may take several minutes.\n" +msgstr "" +"\n" +" Das gebündelte File Check Plugin wurde mit neuen hochpriorisierten " +"Checks aktualisiert. Es wird empfohlen, jetzt einen vollständigen\n" +" Datei-Check durchzuführen, um sicherzustellen, dass du über kritische " +"Probleme in deinen hochgeladenen Dateien informiert bist. Abhängig\n" +" von der Größe deines Upload-Ordners kann das mehrere Minuten dauern.\n" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:9 +msgid "" +"\n" +" You can run a full file check by clicking the button below or " +"alternatively at any time from the\n" +" File Check plugin settings.\n" +msgstr "" +"\n" +" Du kannst einen vollständigen Datei-Check durchführen, indem du auf " +"den unten stehenden Button klickst oder alternativ jederzeit\n" +" über die Einstellungen des File Check Plugins.\n" + +#: octoprint_file_check/templates/snippets/fileCheckButton.jinja2:1 +msgid "Run full file check now" +msgstr "Vollständigen File Check jetzt ausführen" + +#: octoprint_file_check/templates/snippets/fileCheckButton.jinja2:3 +msgid "Last check:" +msgstr "Letzter check:" + diff --git a/translations/messages.pot b/translations/messages.pot index dc454e9..21979eb 100644 --- a/translations/messages.pot +++ b/translations/messages.pot @@ -1,30 +1,31 @@ # Translations template for OctoPrint-FileCheck. -# Copyright (C) 2020 The OctoPrint Project +# Copyright (C) 2024 The OctoPrint Project # This file is distributed under the same license as the OctoPrint-FileCheck # project. -# FIRST AUTHOR , 2020. +# FIRST AUTHOR , 2024. # #, fuzzy msgid "" msgstr "" -"Project-Id-Version: OctoPrint-FileCheck 2020.6.22\n" +"Project-Id-Version: OctoPrint-FileCheck 2024.3.27\n" "Report-Msgid-Bugs-To: i18n@octoprint.org\n" -"POT-Creation-Date: 2020-06-22 16:27+0200\n" +"POT-Creation-Date: 2024-03-26 14:08+0100\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=utf-8\n" "Content-Transfer-Encoding: 8bit\n" -"Generated-By: Babel 2.8.0\n" +"Generated-By: Babel 2.12.1\n" -#: octoprint_file_check/__init__.py:103 +#: build/lib/octoprint_file_check/__init__.py:138 +#: octoprint_file_check/__init__.py:421 msgid "" "Without this plugin OctoPrint will no longer be able to check if uploaded" " files contain common problems and inform you about that fact." msgstr "" -#: octoprint_file_check/static/js/file_check.js:12 +#: build/lib/octoprint_file_check/static/js/file_check.js:12 msgid "" "Your sliced file still contains a place holder " "{travel_speed}. This is a common issue when using old " @@ -35,12 +36,123 @@ msgid "" "cause issues!" msgstr "" -#: octoprint_file_check/static/js/file_check.js:31 +#: build/lib/octoprint_file_check/static/js/file_check.js:35 +#: octoprint_file_check/static/js/file_check.js:156 +#: octoprint_file_check/static/js/file_check.js:221 msgid "Read more..." msgstr "" -#: octoprint_file_check/static/js/file_check.js:34 +#: build/lib/octoprint_file_check/static/js/file_check.js:40 #, python-format msgid "File Check detected issues with %(storage)s:%(path)s!" msgstr "" +#: octoprint_file_check/__init__.py:160 +msgid "Allows to run File Check and view the results." +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:21 +msgid "" +"Your file still contains a place holder {travel_speed}. This" +" is a common issue when using old start/stop GCODE code snippets in " +"current versions of Cura, as the placeholder name switched to " +"{speed_travel} at some point and no longer gets replaced in " +"current versions. You need to fix this in your slicer and reslice your " +"file, do not print it like it is as it will cause issues!" +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:30 +msgid "" +"Your file contains an API key that is not supposed to be there. This is " +"caused by a bug in your slicer, and known to happen with PrusaSlicer (<= " +"2.1.1), BambuStudio (<= 1.8.4) and OrcaSlicer (<= 1.9.0). Do not share " +"this file with anyone, update your slicer to a patched version " +"immediately, and reslice your file. Also consider changing your API key " +"in OctoPrint, as it might have been leaked by your slicer to third " +"parties through any GCODE files shared previously." +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:44 +msgid "unknown" +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:50 +msgid "Current set of checks" +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:52 +msgid "Outdated set of checks" +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:90 +msgid "Run File Check on all files?" +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:91 +msgid "" +"This will perform a check of all of your uploaded files for known issues." +" Depending on the amount of files this could take several minutes. It " +"should not be done while a print is running." +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:161 +msgid "File Check detected the following issues:" +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:241 +#, python-format +msgid "File Check detected issues with %(path)s!" +msgstr "" + +#: octoprint_file_check/static/js/file_check.js:269 +#: octoprint_file_check/static/js/file_check.js:302 +msgid "File Check detected issues with this file!" +msgstr "" + +#: octoprint_file_check/templates/file_check_settings.jinja2:1 +msgid "File Check" +msgstr "" + +#: octoprint_file_check/templates/file_check_settings.jinja2:3 +msgid "" +"\n" +" The bundled File Check plugin allows checking your uploaded files for" +" known slicer misconfigurations and related issues.\n" +" The plugin automatically checks all freshly uploaded files and files " +"selected for printing, but for already uploaded\n" +" files you can also trigger a full file check manually. It is " +"recommended to do this whenever new checks are added\n" +" to the plugin, in which case your last check will be marked as " +"outdated below.\n" +msgstr "" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:1 +msgid "A full File Check is suggested" +msgstr "" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:3 +msgid "" +"\n" +" The bundled File Check plugin has been updated with new high priority" +" checks. It is recommended to run a \n" +" full file check now to ensure that you are aware of any critical " +"issues in your uploaded files. Depending on the \n" +" size of your upload folder, this may take several minutes.\n" +msgstr "" + +#: octoprint_file_check/templates/file_check_wizard.jinja2:9 +msgid "" +"\n" +" You can run a full file check by clicking the button below or " +"alternatively at any time from the\n" +" File Check plugin settings.\n" +msgstr "" + +#: octoprint_file_check/templates/snippets/fileCheckButton.jinja2:1 +msgid "Run full file check now" +msgstr "" + +#: octoprint_file_check/templates/snippets/fileCheckButton.jinja2:3 +msgid "Last check:" +msgstr "" +