🔧 *_ENABLE_ON is LOW/HIGH

MarlinFirmware · Nov 12, 2024 · a2ca511 · a2ca511
1 parent 72bf822
commit a2ca511
Show file tree

Hide file tree

Showing 376 changed files with 4,136 additions and 4,136 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -1773,17 +1773,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1775,17 +1775,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/3DMatik/XL/Configuration.h b/config/examples/3DMatik/XL/Configuration.h
@@ -1773,17 +1773,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1773,17 +1773,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1773,17 +1773,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1842,17 +1842,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -1843,17 +1843,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1773,17 +1773,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1774,17 +1774,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
@@ -1773,17 +1773,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
@@ -1773,17 +1773,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
@@ -1810,17 +1810,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!

diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
@@ -1776,17 +1776,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!