From 2d369451ae2a1326f64c37221802e1f4079b590a Mon Sep 17 00:00:00 2001 From: Santhosh Kannan Date: Fri, 28 Jul 2023 10:58:15 +0200 Subject: [PATCH] Add instructions for upgrading from V2 to V3 in README (#197) This commit adds a new section in the README.md file detailing instructions for users upgrading from V2 to V3. --- README.md | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/README.md b/README.md index 3f7be2885f..a5a4617d0f 100644 --- a/README.md +++ b/README.md @@ -60,6 +60,11 @@ Follow the programming instruction on page 8 of the [Quick Start Guide](https:// > Note: There are also physical reset buttons on both keyboards which can be used to enter and exit the bootloader mode. Their location is described in section 2.7 on page 9 in the [User Manual](https://kinesis-ergo.com/wp-content/uploads/Advantage360-ZMK-KB360-PRO-Users-Manual-v3-10-23.pdf) and use is described in section 5.9 on page 14. +### Upgrading from V2 to V3 + +If you are upgrading from V2 to V3, and if the flashing didn't work as expected (i.e. if you are unable to pair the keyboard via Bluetooth), then consider [resetting](https://kinesis-ergo.com/support/kb360pro/#firmware-updates) both halves of the keyboard to its native state. Make sure to use the `settings-reset.uf2` file from +the V3 branch of this repository. After doing this, proceed with the flashing instructions above. + ## Other support Further support resources can be found on Kinesis.com: