Belgium, Flanders: Ecopower

[lennie-BE]

For the variable tariffs from Ecopower the templates below should work. I've checked these with Ecopower support.

Note! check the values of the parameters on the most recent tariff cards here: https://www.ecopower.be/groene-stroom/archief-tariefkaarten

Some variables are depending on the region, the type of contract, or even the total amount af annual consumption. So check it out!

Template for consumption:

{% set s = {
"bijz_accijns": 0.04748,
"energiebijdrage": 0.0019261,
"kost_gsc": 0.01581,
"kost_wkk": 0.002576,
"afnametarief": 0.0508125,
"btw": 1.06,
"marge_procentueel": 1.02,
"marge_per_kwh": 0.004
} %}
{{((((current_price * s.marge_procentueel) + s.marge_per_kwh) + s.bijz_accijns + s.energiebijdrage + s.kost_gsc + s.kost_wkk + s.afnametarief) * s.btw) | float}}

Template for injection:

{% set s = {
"marge_procentueel": 0.85,
"marge_per_kwh": 0.004
} %}
{{((current_price * s.marge_procentueel) - s.marge_per_kwh) | float}}

[willembuys]

Ecopower has updated their price formula for injection, which is now 98% of the day-ahead price with a fixed margin of 15 euro/MWh.
If I update the values in the above template for injection, this results in:

 {% set s = {
"marge_procentueel": 0.98,
"marge_per_kwh": 0.015
} %}
{{((current_price * s.marge_procentueel) - s.marge_per_kwh) | float}}

[JohanDeckx]

Being quite new to HA, I can't find where to integrate the INJECTION template???
Anyone has some suggestion to me?

Thanks

[willembuys]

I have setup two devices: one for consumption, one for injection.

[EnigmaTD]

did you use the same token for both devices?
I did not save my token, can it be retrieved somewhere?

[willembuys]

Yes, both devices use the same API key.
It is stored in the configuration of a device.
If you don't have your token anymore, you can create a new one on the ENTSO-E platform.