R-IoT firmware v1.8

note

Use this version for compatibility with MuBu v1.9.2 and later.
You can still use v1.7 with MuBu v1.9.1 and earlier.

quick start

• Download and install Energia version 17 from energia.nu/download/.
• Modify the cc3200.ld file and change the HEAP_SIZE value to 0x00007000 :
  • on Windows this file is located into C:\Program Files(x86)\energia-0101E0017\hardware\cc3200\cores\cc3200
  • on Mac OS, right-click on the Energia application and select "show package contents", then go to Contents/Resources/Java/hardware/cc3200/cores/cc3200
  • it might not be enough; in case of errors such as section `.heap' will not fit in region `SRAM' and region `SRAM' overflowed by 1032 bytes, you should lower again HEAP_SIZE.
• Get the SLFS library from github.com/Ircam-R-IoT/SLFS and drop it into Documents/Energia/libraries.
• Open the firmware.ino file with Energia.
• Select in menu Tools > Boards > LauchPad w/ cc3200 (80MHz)
• Hit the "Verify" button in the upper left corner. If it builds, you're ready to upload it to the R-IoT board.
• Choose the serial port starting with tty

going further

For more information, please visit ismm.ircam.fr/riot/.

credits

This project has been developed by the ISMM team at IRCAM-Centre Pompidou within the CoSiMa project (funded by ANR), the MusicBricks project funded by the European Union's Horizon 2020 research and innovation programme, and the RAPID-MIX project (H2020-ICT-2014-1 Project ID 644862).