install: Various Asterisk/DAHDI installation improvements.

* install: Target DAHDI 3.4.0.
* install: Actually install res_msp. This module has been present
  in the repo but the entry to install it was never added.
* install: Ensure the install_prereq function is run before the package
  manager is used for anything else. This prevents the optimization code
  of skipping package installation if the package manager was used recently
  from preventing these pre-reqs from being installed in the first place.
* Remove DAHDI patches merged and present in DAHDI Linux 3.4.0.
* Streamline/enhance commands for stopping/restarting DAHDI.
* config: Update verify.conf with user variables. This file has
  always needed to be updated, but previously we weren't updating it,
  requiring the user to manually fix it afterwards.

Resolves: #39
PHREAKSCRIPT-26 #close
PHREAKSCRIPT-27 #close
PHREAKSCRIPT-31 #close

README.md

@@ -3,9 +3,9 @@ A utility to automate the installation, maintenance, and debugging of Asterisk/D
 
 PhreakScript installs:
 
-- Asterisk 21.2.0 (latest standard release[1] of Asterisk)
-- DAHDI Linux 3.3.0 (with optional DAHDI install flag)
-- DAHDI Tools 3.3.0 (with optional DAHDI install flag)
+- Asterisk 21.4.3 (latest standard release[1] of Asterisk)
+- DAHDI Linux 3.4.0 (with optional DAHDI install flag)
+- DAHDI Tools 3.4.0 (with optional DAHDI install flag)
 - wanpipe 7.0.38 (with optional wanpipe install flag)
 - many additional features and stability improvements
    - Restores the "great purge" of DAHDI drivers that were removed in 2018 by Sangoma

phreaknet.1.md

@@ -154,6 +154,9 @@ the best Asterisk and DAHDI experience.
 **restart**
 : Fully restart DAHDI, wanpipe, and Asterisk
 
+**stop**
+: Fully stop DAHDI, wanpipe, and Asterisk
+
 **kill**
 : Forcibly kill Asterisk
 

phreaknet.sh

@@ -1,8 +1,8 @@
 #!/bin/sh
 
 # PhreakScript
-# (C) 2021-2023 Naveen Albert, PhreakNet, and others - https://github.com/InterLinked1/phreakscript ; https://portal.phreaknet.org ; https://docs.phreaknet.org
-# v1.1.3 (2024-03-17)
+# (C) 2021-2024 Naveen Albert, PhreakNet, and others - https://github.com/InterLinked1/phreakscript ; https://portal.phreaknet.org ; https://docs.phreaknet.org
+# v1.1.4 (2024-09-11)
 
 # Setup (as root):
 # cd /usr/local/src
@@ -13,6 +13,7 @@
 # phreaknet install
 
 ## Begin Change Log:
+# 2024-09-11 1.1.4 DAHDI: Target DAHDI 3.4.0, update patches
 # 2024-03-17 1.1.3 DAHDI: Only build wanpipe if requested
 # 2024-03-09 1.1.2 Asterisk: fix broken patches that no longer applied
 # 2024-01-12 1.1.1 Asterisk: target Asterisk 21.1.0-rc1, fix 'phreaknet restart' command
@@ -196,22 +197,18 @@ AST_SOURCE_NAME="asterisk-${AST_DEFAULT_MAJOR_VER}-current"
 AST_RC_SOURCE_NAME="asterisk-${AST_DEFAULT_MAJOR_VER}-testing-rc1"
 AST_RC_SOURCE_NAME2="asterisk-${AST_DEFAULT_MAJOR_VER}-testing-rc2"
 
-DAHDI_VERSION="3.2.0"
+# DAHDI_MM_VER="${DAHDI_VERSION:0:1}${DAHDI_VERSION:2:1}" Requires bash
+DAHDI_MM_VER=34
+DAHDI_VERSION="3.4.0"
+#DAHLIN_SRC_NAME="dahdi-linux-${DAHDI_VERSION}.tar.gz"
+#DAHTOOL_SRC_NAME="dahdi-tools-${DAHDI_VERSION}.tar.gz"
+#DAHLIN_SRC_URL="https://github.com/asterisk/dahdi-linux/releases/download/v${DAHDI_VERSION}/${DAHLIN_SRC_NAME}"
+#DAHTOOL_SRC_URL="https://github.com/asterisk/dahdi-tools/releases/download/v${DAHDI_VERSION}/${DAHTOOL_SRC_NAME}"
 DAHLIN_SRC_NAME="dahdi-linux-current.tar.gz"
 DAHTOOL_SRC_NAME="dahdi-tools-current.tar.gz"
 DAHLIN_SRC_URL="http://downloads.asterisk.org/pub/telephony/dahdi-linux/dahdi-linux-current.tar.gz"
 DAHTOOL_SRC_URL="http://downloads.asterisk.org/pub/telephony/dahdi-tools/dahdi-tools-current.tar.gz"
 
-# Pull from GitHub for now, since 3.3.0 is only available there right now
-DAHDI_VERSION="3.3.0"
-DAHLIN_SRC_NAME="dahdi-linux-${DAHDI_VERSION}.tar.gz"
-DAHTOOL_SRC_NAME="dahdi-tools-${DAHDI_VERSION}.tar.gz"
-DAHLIN_SRC_URL="https://github.com/asterisk/dahdi-linux/releases/download/v${DAHDI_VERSION}/${DAHLIN_SRC_NAME}"
-DAHTOOL_SRC_URL="https://github.com/asterisk/dahdi-tools/releases/download/v${DAHDI_VERSION}/${DAHTOOL_SRC_NAME}"
-
-# DAHDI_MM_VER="${DAHDI_VERSION:0:1}${DAHDI_VERSION:2:1}" Requires bash
-DAHDI_MM_VER=33
-
 LIBPRI_SOURCE_NAME="libpri-1.6.1"
 LIBSS7_VERSION="2.0.1"
 WANPIPE_SOURCE_NAME="wanpipe-current" # wanpipe-latest (7.0.37.1, 2023-12-21)
@@ -349,7 +346,7 @@ phreakscript_info() {
 }
 
 if [ "$1" = "commandlist" ]; then
-	echo "about help version examples info wizard make man mancached install source experimental dahdi odbc installts fail2ban apiban freepbx pulsar sounds boilerplate-sounds ulaw remsil uninstall uninstall-all bconfig config keygen keyperms update astpr patch genpatch alembic freedisk topdir topdisk enable-swap disable-swap start restart kill forcerestart ban applist funclist dialplanfiles validate trace paste iaxping pcap pcaps sngrep enable-backtraces backtrace backtrace-only rundump threads reftrace valgrind cppcheck docverify runtests runtest stresstest ccache fullpatch docgen mkdocs pubdocs edit"
+	echo "about help version examples info wizard make man mancached install source experimental dahdi odbc installts fail2ban apiban freepbx pulsar sounds boilerplate-sounds ulaw remsil uninstall uninstall-all bconfig config keygen keyperms update astpr patch genpatch alembic freedisk topdir topdisk enable-swap disable-swap start restart stop kill forcerestart ban applist funclist dialplanfiles validate trace paste iaxping pcap pcaps sngrep enable-backtraces backtrace backtrace-only rundump threads reftrace valgrind cppcheck docverify runtests runtest stresstest ccache fullpatch docgen mkdocs pubdocs edit"
 	exit 0
 fi
 
@@ -407,6 +404,7 @@ Commands:
    disable-swap       Disable and deallocate temporary swap file
    start              Fully start DAHDI, wanpipe, and Asterisk
    restart            Fully restart DAHDI, wanpipe, and Asterisk
+   stop               Fully stop DAHDI, wanpipe, and Asterisk
    kill               Forcibly kill Asterisk
    forcerestart       Forcibly restart Asterisk
    ban                Manually ban an IP address using iptables
@@ -554,25 +552,31 @@ stop_wanpipe() {
 	fi
 }
 
-# Completely restart wanpipe, DAHDI (and any DAHDI drivers), and Asterisk
-# This is surprisingly complicated, and can be dangerous if done incorrectly
-# $1 to restart without completely restarting Asterisk
-restart_telephony() {
-	if [ "$1" = "1" ]; then
-		rasterisk -x "module unload chan_dahdi" | grep "Unloaded chan_dahdi"
-		if [ $? -ne 0 ]; then
-			die "chan_dahdi could not be unloaded"
-		fi
-	else
-		service asterisk stop # stop Asterisk
-		astpid=$( ps -aux | grep "asterisk" | grep -v "grep" | head -n 1 | xargs | cut -d' ' -f2 )
-		if [ "$astpid" != "" ]; then
-			# if that didn't work, kill it manually
-			kill -9 $astpid
-			printf "Killed Asterisk process %s\n" "$astpid"
+stop_telephony() {
+	astpid=$( ps -aux | grep "asterisk" | grep -v "grep" | head -n 1 | xargs | cut -d' ' -f2 )
+	if [ "$astpid" != "" ]; then
+		if [ "$1" = "1" ]; then
+			# Only need to unload chan_dahdi if it's loaded
+			rasterisk -x "module show like chan_dahdi" | grep "chan_dahdi"
+			if [ $? -eq 0 ]; then
+				rasterisk -x "module unload chan_dahdi" | grep "Unloaded chan_dahdi"
+				if [ $? -ne 0 ]; then
+					die "chan_dahdi could not be unloaded"
+				fi
+			fi
 		else
-			printf "Asterisk not currently running...\n"
+			service asterisk stop # stop Asterisk
+			astpid=$( ps -aux | grep "asterisk" | grep -v "grep" | head -n 1 | xargs | cut -d' ' -f2 )
+			if [ "$astpid" != "" ]; then
+				# if that didn't work, kill it manually
+				kill -9 $astpid
+				printf "Killed Asterisk process %s\n" "$astpid"
+			else
+				printf "Asterisk not currently running...\n"
+			fi
 		fi
+	else
+		printf "Asterisk not currently running...\n"
 	fi
 	lsmod | grep dahdi
 	curdrivers=`lsmod | grep "dahdi " | xargs | cut -d' ' -f4-`
@@ -601,6 +605,9 @@ restart_telephony() {
 	else
 		printf "DAHDI is not running, skipping...\n"
 	fi
+}
+
+restart_start_telephony() {
 	printf "Starting DAHDI...\n"
 	start_wanpipe
 	modprobe dahdi
@@ -630,7 +637,7 @@ restart_telephony() {
 		dahdi_cfg
 		if [ $? -ne 0 ]; then
 			dahdi_hardware
-			die "DAHDI failed to initialize... please try manually modprobe'ing the drivers."
+			die "DAHDI failed to initialize... please try manually modprobe'ing the drivers and rerunning dahdi_genconf and dahdi_cfg."
 		fi
 	fi
 	printf "DAHDI is now running normally...\n"
@@ -643,6 +650,14 @@ restart_telephony() {
 	fi
 }
 
+# Completely restart wanpipe, DAHDI (and any DAHDI drivers), and Asterisk
+# This is surprisingly complicated, and can be dangerous if done incorrectly
+# $1 to restart without completely restarting Asterisk
+restart_telephony() {
+	stop_telephony "$1"
+	restart_start_telephony
+}
+
 # Mainly intended to start the telephony drivers on bootup, since this doesn't always happen automatically
 start_telephony() {
 	# sed: Each one ends in - or +, need to ignore that
@@ -1314,15 +1329,6 @@ dahdi_unpurge() { # undo "great purge" of 2018: $1 = DAHDI_LIN_SRC_DIR
 	dahdi_undo $1 "devtype" "Remove struct devtype for unsupported drivers" "75620dd9ef6ac746745a1ecab4ef925a5b9e2988"
 	dahdi_undo $1 "wcb" "Remove support for all but wcb41xp wcb43xp and wcb23xp." "29cb229cd3f1d252872b7f1924b6e3be941f7ad3"
 	dahdi_undo $1 "wctdm" "Remove support for wctdm800, wcaex800, wctdm410, wcaex410." "a66e88e666229092a96d54e5873d4b3ae79b1ce3"
-	dahdi_undo $1 "wcte12xp" "Remove support for wcte12xp." "3697450317a7bd60bfa7031aad250085928d5c47"
-	dahdi_custom_patch "wcte12xp_base" "$1/drivers/dahdi/wcte12xp/base.c" "https://raw.githubusercontent.com/InterLinked1/phreakscript/master/patches/wcte12xp_base.diff" # bug fix for case statement fallthrough
-	dahdi_custom_patch "wcte12xp_types" "$1/drivers/dahdi/wcte12xp/base.c" "https://raw.githubusercontent.com/InterLinked1/phreakscript/master/patches/wcte12xp_types.diff" # bug fix for >= 5.16 stdbool.h
-	dahdi_undo $1 "wcte11xp" "Remove support for wcte11xp." "3748456d22122cf807b47d5cf6e2ff23183f440d"
-	if [ $DAHDI_MM_VER -lt 33 ]; then
-		dahdi_undo $1 "wctdm" "Remove support for wctdm." "04e759f9c5a6f76ed88bc6ba6446fb0c23c1ff55"
-	fi
-	dahdi_undo $1 "wct1xxp" "Remove support for wct1xxp." "dade6ac6154b58c4f5b6f178cc09de397359000b"
-	dahdi_undo $1 "wcfxo" "Remove support for wcfxo." "14198aee8532bbafed2ad1297177f8e0e0f13f50"
 
 	# The tor2 and pciradio patches do not revert cleanly on their own. We need to finish it off manually with additional patches:
 	dahdi_undo_force $1 "tor2" "Remove support for tor2." "60d058cc7a064b6e07889f76dd9514059c303e0f"
@@ -1609,7 +1615,8 @@ install_dahdi() {
 	wget https://github.com/asterisk/libss7/archive/refs/tags/${LIBSS7_VERSION}.tar.gz
 	tar -zxvf ${LIBSS7_VERSION}.tar.gz
 	rm ${LIBSS7_VERSION}.tar.gz
-	cd ${LIBSS7_VERSION}
+	ls -la
+	cd libss7-${LIBSS7_VERSION}
 	make && make install
 
 	# Wanpipe
@@ -1618,6 +1625,9 @@ install_dahdi() {
 	fi
 
 	service dahdi restart
+
+	# Completion message for users just running "phreaknet dahdi"
+	echog "DAHDI and friends have finished installing"
 }
 
 install_wanpipe() {
@@ -1865,6 +1875,7 @@ phreak_patches() { # $1 = $PATCH_DIR, $2 = $AST_SRC_DIR
 
 	phreak_tree_module "res/res_digitmap.c"
 	phreak_tree_module "res/res_irc.c"
+	phreak_tree_module "res/res_msp.c"
 	phreak_tree_module "res/res_phreaknet.c"
 	phreak_tree_module "res/res_pjsip_presence.c"
 
@@ -1929,9 +1940,17 @@ phreak_patches() { # $1 = $PATCH_DIR, $2 = $AST_SRC_DIR
 
 	# Unmerged patches
 	git_patch "app_confbridge_Fix_bridge_shutdown_race_condition.patch" # app_confbridge: Fix bridge shutdown race condition
+
+	## WIP
 	asterisk_pr_unconditional 292 # GROUP VARs
 	asterisk_pr_unconditional 414 # IAX2 loopback warning
 
+	# Unmerged
+	asterisk_pr_unconditional 272 # Call Waiting Deluxe
+	asterisk_pr_unconditional 438 # Last Number Redial
+
+	### TODO: Include ASTERISK-30339 and ASTERISK-30374 once resubmitted on GitHub
+
 	if [ "$RTPULSING" = "1" ]; then
 		# Patches split up to make it easier to selectively redo the 2nd one if a patch conflict occurs and the patch needs to be rebased.
 		git_patch "ast_rtoutpulsing1.diff" # chan_dahdi: add rtoutpulsing
@@ -2759,6 +2778,11 @@ elif [ "$cmd" = "install" ]; then
 	if [ "$PKG_AUDIT" = "1" ]; then
 		pkg_before=$( apt list --installed )
 	fi
+	# Install Pre-Reqs
+	printf "%s %d\n" "Starting installation with country code" $AST_CC
+	quell_mysql
+	printf "%s\n" "Installing prerequisites..."
+	install_prereq # This must be done before any other packages are installed since we'll skip package install checks if package manager was used recently.
 	if [ "$DEVMODE" = "1" ]; then
 		# Install the Linux headers if we can, but don't abort if we can't.
 		apt-get install -y linux-headers-`uname -r`
@@ -2784,11 +2808,6 @@ elif [ "$cmd" = "install" ]; then
 		fi
 	fi
 	cd $AST_SOURCE_PARENT_DIR
-	# Install Pre-Reqs
-	printf "%s %d\n" "Starting installation with country code" $AST_CC
-	quell_mysql
-	printf "%s\n" "Installing prerequisites..."
-	install_prereq
 	# Get DAHDI
 	if [ "$CHAN_DAHDI" = "1" ]; then
 		if [ ! -d /etc/dahdi ] || [ "$FORCE_INSTALL" = "1" ]; then
@@ -3404,12 +3423,16 @@ elif [ "$cmd" = "config" ]; then
 	printf "%s: %s\n" "PhreakNet CLLI code" $PHREAKNET_CLLI
 	printf "%s\n" "InterLinked API key seems to be of valid format, not displaying for security reasons..."
 	install_boilerplate
-	## Inject user config (CLLI code, API key)
 	if [ "$inject" = "1" ]; then
+		## Inject user config (CLLI code, API key)
 		sed -i "s/abcdefghijklmnopqrstuvwxyz/$INTERLINKED_APIKEY/g" $AST_CONFIG_DIR/$EXTENSIONS_CONF_FILE
 		sed -i "s/WWWWXXYYZZZ/$PHREAKNET_CLLI/g" $AST_CONFIG_DIR/$EXTENSIONS_CONF_FILE
 		sed -i "s/5551111/$PHREAKNET_DISA/g" $AST_CONFIG_DIR/$EXTENSIONS_CONF_FILE
 		printf "Updated [globals] in %s/extensions.conf with dynamic variables. If globals are stored in a different file, manual updating is required." $AST_CONFIG_DIR
+		## Also update verify.conf
+		sed -i "s/HSTNTXMOCG0/$PHREAKNET_CLLI/g" $AST_CONFIG_DIR/verify.conf
+		sed -i "s/5551111/$PHREAKNET_DISA/g" $AST_CONFIG_DIR/verify.conf
+		printf "Updated %s/verify.conf" $AST_CONFIG_DIR
 	fi
 	printf "%s\n" "Boilerplate config installed! Note that these files may still require manual editing before use."
 elif [ "$cmd" = "bconfig" ]; then
@@ -3674,6 +3697,13 @@ elif [ "$cmd" = "restart" ]; then
 	else
 		restart_telephony 1
 	fi
+elif [ "$cmd" = "stop" ]; then
+	# not really forcing install of anything, but to use the --force flag
+	if [ "$FORCE_INSTALL" = "1" ]; then
+		stop_telephony 0
+	else
+		stop_telephony 1
+	fi
 elif [ "$cmd" = "start" ]; then
 	start_telephony
 elif [ "$cmd" = "edit" ]; then