"ERROR Could not create WNBD disk."

[drcorg]

Following the NBD setup guide, the server in OPL is running and the driver installs successfully but I can never get it to actually mount. I get the error message
libwnbd.dll!WnbdIoctlCreate ERROR Could not create WNBD disk. Error: 1225. Error message: The remote computer refused the network connection.
Any help would be appreciated.

[drcorg]

I forgot to add I'm on Windows 11 and the latest release.

[GDX-X]

Hey,
I'm not sure but I've never used the nbd server but maybe windows defender is blocking the connection maybe? Or the firewall?

I know it works because someone recently used it with it PSX

[israpps]

windows 11 might be the issue...

I made it work on win10 with secure boot disabled

[drcorg]

Secure boot is off and even with firewall and defender disabled, still no dice...
Just to be clear do I have to make any edits in the network settings of OPL or should I leave them on their defaults?

[GDX-X]

You must specify the ip address of your PS2 on OPL so that it can recognize it

By default I think it's 192.168.0.10

However, it may
'another device on your local network also uses this ip address so change that of the PS2 for example to 192.168.0.20

[drcorg]

Sadly even with another ip address the problem persists. I suspect it's a windows 11 thing because I get the same error on another win11 system. I'll stick to transferring manually for now.

[phr34kr]

I'm getting a similar error @drcorg - wondering if you ever found a fix for it...

libwnbd.dll!WnbdIoctlCreate ERROR Could not create WNBD disk. Error: 87. Error message: The parameter is incorrect.

Edit: Also on Win 11, running OPL v1.2.0-Beta-2048-17efb4

[GDX-X]

Try reinstalling the dokan driver https://github.com/dokan-dev/dokany/releases

[bignaux]

btw, the IP OPL show can be wrong, don't believe it !

[biel1404]

WNBD disk. Error: 87. Error message: The parameter is incorrect.
IP: 192.168.15.25
OPL-Beta1.2.0-2048-17efb4
Windows 10

[Lastr1ks]

Friends, I'm going to tell you how to solve this problem.
3 and 4 points only if the previous ones do not help.

1. You need to use a static IP address in the OPL settings and in Windows.
2. Use OPL 1.1.0 https://github.com/ps2homebrew/Open-PS2-Loader/releases/download/v1.1.0/OPNPS2LD-v1.1.0.7z
3. Disabling Secure Boot in any way (I use Bios)
4. Disable the Firewall and Windows Defender.

The slightest deviations from the points lead to mistakes!!!
P.S. Noticed a small nuance: When the console is idle in an inactive state and NBD is turned on, the connection time is limited (about ~ 3 minutes).
I will be glad if I helped someone.

[GDX-X]

If anyone with a 1TB or 2TB hard drive is using NBD, can you tell me if it takes a long time to create the cache when starting PFS Batchkit Manager?

[Lastr1ks]

I use a 2TB HDD. It takes from 10 to 20 seconds to create a cache.

[GDX-X]

Thanks! Someone told me it takes over 10 minutes to create the cache with NBD, which I find strange, probably a firewall or other program doing this to it.

[GDX-X]

I use a 2TB HDD. It takes from 10 to 20 seconds to create a cache.

Do you have a lot of games on it?

[Lastr1ks]

I use a 2TB HDD. It takes from 10 to 20 seconds to create a cache.

Do you have a lot of games on it?

1/4 is filled with games

[mrkylegp]

I get similar but mine says "The parameter is incorrect"

Using OPL 1.2.0 beta

[mrkylegp]

WNBD disk. Error: 87. Error message: The parameter is incorrect. IP: 192.168.15.25 OPL-Beta1.2.0-2048-17efb4 Windows 10

Same here. Might be something with the current PFS BatchKit version and OPL 1.2.0 beta.

[BeemerDream]

I get this error message too: "libwnbd.dll!WnbdIoctlCreate ERROR Could not create WNBD disk. Error: 1225" Windows 11, The Opl version with the NBD server