Any questions about Stormworks Connect

[DilerFeed]

If you have any questions about the program's source code or its functionality, do not hesitate to ask here.

[MA3-537]

https://drive.google.com/file/d/1iG1sKc1wY8SDfk85m41zWCZc07GHQ8Q3/view?usp=drive_link

https://drive.google.com/file/d/1O-2ommK0CbT4n7ZN6OGt1bgLe15iPv9H/view?usp=drive_link

Kann ich nicht öffnen / installieren \ I can't open / install

[DilerFeed]

Thank you for contacting me. This is a very unusual problem. When I am free, I will definitely try to help, but right now I am just swamped and have no free time. I apologize for such problems.

[DilerFeed]

But I would still like to know more detailed information from you:

1. What version of the program?
2. Does this error only appear if you run the program with the steering wheel connected to the computer?
3. If point 2 is true, then what happens if you run the program when the steering wheel is not connected to the computer, and then connect the steering wheel to the computer? Will it appear in the list of joysticks? And what if you try to restart the program after that?

[MA3-537]

1. Version 1.3.0.0
2. Tests haben ergeben, das ich nur die R5 BASE ohne SRP 2 Pedale und Generic USB Joystick ( Blinker https://pphalmar.pl/gry-symulacyjne/almar-skrs-manetka-kierunkowskazow-podwojna-do-gier-ats-ets2-itp#/strony/duze/Z20240111113256.jpg ) benutzen kann
3. Tests have shown that I can only use the R5 BASE without SRP 2 pedals and Generic USB joystick ( Blinker https://pphalmar.pl/gry-symulacyjne/almar-skrs-manetka-kierunkowskazow-podwojna-do-gier-ats-ets2-itp#/strony/duze/Z20240111113256.jpg

[DilerFeed]

Thank you for the detailed description of the problem. I will try to help as quickly as possible, although I must admit that I can already assume that the problem is related to the complexity of your steering wheel assembly.

[DilerFeed]

Hello again. I have studied the problem as much as possible, made corrections as far as I understand the essence of the problem and compiled the program (uploaded to Google Drive, link below). Please check the program and write feedback.

https://drive.google.com/file/d/1zyx_DCZVrd9huCbQEvLSdc0v5turZ-lq/view?usp=sharing

This should probably fix at least the appearance of errors, but I am not sure that it will nevertheless allow the program to work properly, since I do not have a steering wheel build even close to the one you have to check.
If this does indeed fix the issues, I'll release this build officially for everyone.

Thank you for your patience and I apologize for the inconvenience.

[MA3-537]

Startet jetzt mit R5 BASE, SRP 2 Pedale und Generic USB Joystick \ Starts now with R5 BASE, SRP 2 pedals and Generic USB joystick
https://drive.google.com/file/d/1kEoeeghjPpXpcVqIvV_Sk3KHVuXdArum/view?usp=sharing
Moza R5 BASE müssten oben stehen im der Liste, geht aber nicht & es hängt sich immer auf \ Moza R5 BASE should be at the top of the list, but it doesn't work & it always hangs https://youtu.be/MqAYgKNv0UY

[MA3-537]

Ohne SRP 2 Pedale und Generic USB Joystick geht es \ Without SRP 2 pedals and Generic USB joystick it works

[DilerFeed]

Sorry. I thought the devices you listed were connected to the base, but as I see they are independent (to be honest I didn't even know that such a thing existed :/). I don't think I can help you here, because as you can see you can only choose one device. However, I can advise you to try to improve the application yourself for your needs, if you want. Since the program is open source, this is quite possible. You can use ChatGPT or something similar for this. Later, if necessary, I can explain how to compile the program or compile it for you.

[MA3-537]

Lenkrad mit Pedale nutzbar ( Base ) , Pedale über zusätzlichen USB Anschluss nicht \ Steering wheel with pedals usable (base), pedals via additional USB port not https://drive.google.com/file/d/1DEQC-VLzwQfSj5CYTMyZ0EDP4O4e_Eyx/view?usp=sharing
Pedal Experimente \ Pedal Experiments https://drive.google.com/file/d/1THi5WACpibhJj3mGUVJYYYNXd263ixs2/view?usp=sharing

[DilerFeed]

This is not surprising, since, as I already wrote, you can only select one device in the program. I'm glad that you can use it in general. You have a cool base and pedals 🙂

[MA3-537]

https://youtube.com/shorts/PF5ulZJI4DQ?si=-5dVQT6ky9Lt1JON

[S24B7]

Not sure if this mod is being maintained, but I found that the screens now show a 0x00000000 error code when loading an image on anything other than 9x5. By that I mean when selecting anything other than 9x5 in the Stormworks connect application it causes said error. I believe this applies to all monitors.

[DilerFeed]

There is no time to develop new functionality yet, but I help with the old one as much as I can. As I understand it, we are talking about transferring regular images. This is quite strange, I tested this functionality many times and it worked regularly on all types of monitors. Could you provide me with an image file (link) that causes this error?