.phan

<?php

use Phan\Issue;

/**
 * This configuration file was automatically generated by 'phan --init --init-level=3'
 *
 * TODOs (added by 'phan --init'):
 *
 * - Go through this file and verify that there are no missing/unnecessary files/directories.
 *   (E.g. this only includes direct composer dependencies - You may have to manually add indirect composer dependencies to 'directory_list')
 * - Look at 'plugins' and add or remove plugins if appropriate (see https://github.com/phan/phan/tree/master/.phan/plugins#plugins)
 * - Add global suppressions for pre-existing issues to suppress_issue_types (https://github.com/phan/phan/wiki/Tutorial-for-Analyzing-a-Large-Sloppy-Code-Base)
 *
 * This configuration will be read and overlayed on top of the
 * default configuration. Command line arguments will be applied
 * after this file is read.
 *
 * @see src/Phan/Config.php
 * See Config for all configurable options.
 *
 * A Note About Paths
 * ==================
 *
 * Files referenced from this file should be defined as
 *
 * ```
 *   Config::projectPath('relative_path/to/file')
 * ```
 *
 * where the relative path is relative to the root of the
 * project which is defined as either the working directory
 * of the phan executable or a path passed in via the CLI
 * '-d' flag.
 */
return [

    // Supported values: '7.0', '7.1', '7.2', '7.3', null.
    // If this is set to null,
    // then Phan assumes the PHP version which is closest to the minor version
    // of the php executable used to execute phan.
    // Automatically inferred from composer.json requirement for "php" of "^5.3.0 || ^7"
    'target_php_version' => '7.3',

    // If enabled, missing properties will be created when
    // they are first seen. If false, we'll report an
    // error message if there is an attempt to write
    // to a class property that wasn't explicitly
    // defined.
    'allow_missing_properties' => false,

    // If enabled, null can be cast as any type and any
    // type can be cast to null. Setting this to true
    // will cut down on false positives.
    'null_casts_as_any_type' => false,

    // If enabled, allow null to be cast as any array-like type.
    // This is an incremental step in migrating away from null_casts_as_any_type.
    // If null_casts_as_any_type is true, this has no effect.
    'null_casts_as_array' => true,

    // If enabled, allow any array-like type to be cast to null.
    // This is an incremental step in migrating away from null_casts_as_any_type.
    // If null_casts_as_any_type is true, this has no effect.
    'array_casts_as_null' => true,

    // If enabled, scalars (int, float, bool, string, null)
    // are treated as if they can cast to each other.
    // This does not affect checks of array keys. See scalar_array_key_cast.
    'scalar_implicit_cast' => false,

    // If enabled, any scalar array keys (int, string)
    // are treated as if they can cast to each other.
    // E.g. array<int,stdClass> can cast to array<string,stdClass> and vice versa.
    // Normally, a scalar type such as int could only cast to/from int and mixed.
    'scalar_array_key_cast' => true,

    // If this has entries, scalars (int, float, bool, string, null)
    // are allowed to perform the casts listed.
    // E.g. ['int' => ['float', 'string'], 'float' => ['int'], 'string' => ['int'], 'null' => ['string']]
    // allows casting null to a string, but not vice versa.
    // (subset of scalar_implicit_cast)
    'scalar_implicit_partial' => [],

    // If true, seemingly undeclared variables in the global
    // scope will be ignored. This is useful for projects
    // with complicated cross-file globals that you have no
    // hope of fixing.
    'ignore_undeclared_variables_in_global_scope' => true,

    // Set this to false to emit PhanUndeclaredFunction issues for internal functions that Phan has signatures for,
    // but aren't available in the codebase, or the internal functions used to run phan
    // (may lead to false positives if an extension isn't loaded)
    // If this is true(default), then Phan will not warn.
    'ignore_undeclared_functions_with_known_signatures' => true,

    // Backwards Compatibility Checking. This is slow
    // and expensive, but you should consider running
    // it before upgrading your version of PHP to a
    // new version that has backward compatibility
    // breaks.
    'backward_compatibility_checks' => false,

    // If true, check to make sure the return type declared
    // in the doc-block (if any) matches the return type
    // declared in the method signature.
    'check_docblock_signature_return_type_match' => false,

    // (*Requires check_docblock_signature_param_type_match to be true*)
    // If true, make narrowed types from phpdoc params override
    // the real types from the signature, when real types exist.
    // (E.g. allows specifying desired lists of subclasses,
    //  or to indicate a preference for non-nullable types over nullable types)
    // Affects analysis of the body of the method and the param types passed in by callers.
    'prefer_narrowed_phpdoc_param_type' => true,

    // (*Requires check_docblock_signature_return_type_match to be true*)
    // If true, make narrowed types from phpdoc returns override
    // the real types from the signature, when real types exist.
    // (E.g. allows specifying desired lists of subclasses,
    //  or to indicate a preference for non-nullable types over nullable types)
    // Affects analysis of return statements in the body of the method and the return types passed in by callers.
    'prefer_narrowed_phpdoc_return_type' => true,

    // If enabled, check all methods that override a
    // parent method to make sure its signature is
    // compatible with the parent's. This check
    // can add quite a bit of time to the analysis.
    // This will also check if final methods are overridden, etc.
    'analyze_signature_compatibility' => true,

    // This setting maps case insensitive strings to union types.
    // This is useful if a project uses phpdoc that differs from the phpdoc2 standard.
    // If the corresponding value is the empty string, Phan will ignore that union type (E.g. can ignore 'the' in `@return the value`)
    // If the corresponding value is not empty, Phan will act as though it saw the corresponding unionTypes(s) when the keys show up in a UnionType of @param, @return, @var, @property, etc.
    //
    // This matches the **entire string**, not parts of the string.
    // (E.g. `@return the|null` will still look for a class with the name `the`, but `@return the` will be ignored with the below setting)
    //
    // (These are not aliases, this setting is ignored outside of doc comments).
    // (Phan does not check if classes with these names exist)
    //
    // Example setting: ['unknown' => '', 'number' => 'int|float', 'char' => 'string', 'long' => 'int', 'the' => '']
    'phpdoc_type_mapping' => [],

    // Set to true in order to attempt to detect dead
    // (unreferenced) code. Keep in mind that the
    // results will only be a guess given that classes,
    // properties, constants and methods can be referenced
    // as variables (like `$class->$property` or
    // `$class->$method()`) in ways that we're unable
    // to make sense of.
    'dead_code_detection' => false,

    // Set to true in order to attempt to detect unused variables.
    // dead_code_detection will also enable unused variable detection.
    // This has a few known false positives, e.g. for loops or branches.
    'unused_variable_detection' => false,

    // If true, this run a quick version of checks that takes less
    // time at the cost of not running as thorough
    // an analysis. You should consider setting this
    // to true only when you wish you had more **undiagnosed** issues
    // to fix in your code base.
    //
    // In quick-mode the scanner doesn't rescan a function
    // or a method's code block every time a call is seen.
    // This means that the problem here won't be detected:
    //
    // ```php
    // <?php
    // function test($arg):int {
    //     return $arg;
    // }
    // test("abc");
    // ```
    //
    // This would normally generate:
    //
    // ```sh
    // test.php:3 TypeError return string but `test()` is declared to return int
    // ```
    //
    // The initial scan of the function's code block has no
    // type information for `$arg`. It isn't until we see
    // the call and rescan test()'s code block that we can
    // detect that it is actually returning the passed in
    // `string` instead of an `int` as declared.
    'quick_mode' => false,

    // If true, then before analysis, try to simplify AST into a form
    // which improves Phan's type inference in edge cases.
    //
    // This may conflict with 'dead_code_detection'.
    // When this is true, this slows down analysis slightly.
    //
    // E.g. rewrites `if ($a = value() && $a > 0) {...}`
    // into $a = value(); if ($a) { if ($a > 0) {...}}`
    'simplify_ast' => true,

    // Enable or disable support for generic templated
    // class types.
    'generic_types_enabled' => true,

    // Override to hardcode existence and types of (non-builtin) globals in the global scope.
    // Class names should be prefixed with '\\'.
    // (E.g. ['_FOO' => '\\FooClass', 'page' => '\\PageClass', 'userId' => 'int'])
    'globals_type_map' => [],

    // The minimum severity level to report on. This can be
    // set to Issue::SEVERITY_LOW, Issue::SEVERITY_NORMAL or
    // Issue::SEVERITY_CRITICAL. Setting it to only
    // critical issues is a good place to start on a big
    // sloppy mature code base.
    'minimum_severity' => Issue::SEVERITY_LOW,

    // Add any issue types (such as 'PhanUndeclaredMethod')
    // to this black-list to inhibit them from being reported.
    'suppress_issue_types' => [],

    // A regular expression to match files to be excluded
    // from parsing and analysis and will not be read at all.
    //
    // This is useful for excluding groups of test or example
    // directories/files, unanalyzable files, or files that
    // can't be removed for whatever reason.
    // (e.g. '@Test\.php$@', or '@vendor/.*/(tests|Tests)/@')
    'exclude_file_regex' => '@^vendor/.*/(tests?|Tests?)/@',

    // A file list that defines files that will be excluded
    // from parsing and analysis and will not be read at all.
    //
    // This is useful for excluding hopelessly unanalyzable
    // files that can't be removed for whatever reason.
    'exclude_file_list' => [],

    // A directory list that defines files that will be excluded
    // from static analysis, but whose class and method
    // information should be included.
    //
    // Generally, you'll want to include the directories for
    // third-party code (such as "vendor/") in this list.
    //
    // n.b.: If you'd like to parse but not analyze 3rd
    //       party code, directories containing that code
    //       should be added to the `directory_list` as
    //       to `excluce_analysis_directory_list`.
    'exclude_analysis_directory_list' => [
        'vendor/',
    ],

    // The number of processes to fork off during the analysis
    // phase.
    'processes' => 1,

    // List of case-insensitive file extensions supported by Phan.
    // (e.g. php, html, htm)
    'analyzed_file_extensions' => [
        'php',
    ],

    // You can put paths to stubs of internal extensions in this config option.
    // If the corresponding extension is **not** loaded, then phan will use the stubs instead.
    // Phan will continue using its detailed type annotations,
    // but load the constants, classes, functions, and classes (and their Reflection types)
    // from these stub files (doubling as valid php files).
    // Use a different extension from php to avoid accidentally loading these.
    // The 'tools/make_stubs' script can be used to generate your own stubs (compatible with php 7.0+ right now)
    'autoload_internal_extension_signatures' => [],

    // A list of plugin files to execute
    // Plugins which are bundled with Phan can be added here by providing their name (e.g. 'AlwaysReturnPlugin')
    // Alternately, you can pass in the full path to a PHP file with the plugin's implementation (e.g. 'vendor/phan/phan/.phan/plugins/AlwaysReturnPlugin.php')
    'plugins' => [
        'AlwaysReturnPlugin',
        'PregRegexCheckerPlugin',
        'UnreachableCodePlugin',
    ],

    // A list of directories that should be parsed for class and
    // method information. After excluding the directories
    // defined in exclude_analysis_directory_list, the remaining
    // files will be statically analyzed for errors.
    //
    // Thus, both first-party and third-party code being used by
    // your application should be included in this list.
    'directory_list' => [
        'src',
        'test',
        'vendor/ceus-media/cache/src',
        'vendor/ceus-media/common/src',
        'vendor/ceus-media/doc-creator/src',
        'vendor/phan/phan/src/Phan',
        'vendor/phpunit/phpunit/src',
    ],

    // A list of individual files to include in analysis
    // with a path relative to the root directory of the
    // project
    'file_list' => [],
];