Project is being constantly updated.
- Currently featured in V2.3347!
OITSWILLIAMV2 is a Voron 2 mod project with unique features, and sometimes breakthrough or stupidly insane features you will stop regretting slowly. It is modded by Oitswilliam Pang and the original design is by the members of Voron Design.
This project is for those who already had a normal and big Voron printer (can be from friends or relatives), with the exception of original parts and skirts.
The goal for this mod is:
- Make it unified,
- Make it safer to use.
| Feature | Status |
|---|---|
| Exhaust Lite Generation 2 | Released |
| RealEstate Generation 2 | Released |
| Replacement / 150mm spec 60mm fan mount | Released |
| Replacement / Replacement skirts | Released |
This repository includes V2 150mm, which is basically Voron 2, but smaller. Normally, it keeps the full-size Afterburner, which can be upgraded to full-size Stealthburner.
When using OITSWILLIAMV2 mod compoments to modify the printer, you can take either one or more with:
- Sleek yet tiltable touchscreen mount called RealEstate.
- Touch screen support after having OctoScreen / OctoDash (for OctoPrint users) or KlipperScreen (for Moonraker / lightweight WebUI users)
- Full DC input (no AC). (150mm mod only)
- Smaller version of chamber exhaust called Exhaust Lite.
- Installing Windows / Debian Linux SBC (single-board computer) or NUC requires replacing the display for the better experience.
- Flying colors (RGB LEDs) via Exhaust Lite.
- Webcam from the back facing at the build plate.
- Modular vent port to exhaust hose.
- Some mods even support Voron Trident. See STLs Readme for explaination.
OITSWILLIAMV2 is a mod for shrunk-down Voron 2.4 with 150x150x130mm build area except that can be a powerhouse of magical flying colors. Other features including:
- It has a DC power input and power output.
- Will have LED bars for users who are interested in putting "flying colors" in back panel.
- Panel clips can be printed in TPU, to prevent scratching on surfaces prone to scratching.
For the repository creator, it is because he originally did not have enough space to put a proper Voron 2.4.
| Standard V2.4 | V2.4 150mm |
|---|---|
| Z chain - IGUS E2-15-10-028-0 Chain | X/Y chain - IGUS E2i-10-10-018-0 Chain |
| Z chain end - IGUS E2-150-10-12PZ Chain Ends | X/Y chain end - IGUS E2-100-10-12PZ Chain Ends |
| 2x SKR 1.3 | 1x BTT Octopus, FYSETC Spider or MKS Monster8 |
- Z chains should be replaced with X/Y chains due to off-distance towards left.
- Stripping 1kg of weight in such small printer requires usage of 4 additional Clockwork 1 motors (NEMA17 Motor 17HS08-1004S or equivalent) to replace Z axis stepper motors.
| Standard V2.4 recommended | V2.4 150mm + OITSWILLIAMV2 Mod Project |
|---|---|
| Coroplast panels as bottom, back and Deck panels | Acrylic panels as bottom, back and Deck panels |
| AC heated bed | 24V DC heated bed |
| AC input | 24V DC input |
If you want to sell the kits of this mod project, please call it "Voron 2.4 with OITSWILLIAMV2 Mod" or related means that mentions Voron 2 and OITSWILLIAMV2. Do not call it "Voron 2.4 enhanced version" or any other means.
No. There are speculative reasons on why 150mm is not the spec size.
- The spacing of the mounts between themselves needs to be changed, which means, like for example standard size (from 250mm to 350mm) has 150mm spacing between the bed mounts, but on a 150mm Voron 2.4, the bed mount needs to be narrower. Unless you have a router or a bench that can perfectly drill corners, the bed mount holes must be moved narrower in about half in order to make sure it is easily mounted.
- Another reason is that as you see the past renders of the printer, one of the chain needs to be changed. Instead of using the chain for the Z axis, XY chain is used on the Z axis.
No, it is made for tinkerers, although it is intended to be an do-it-anywhere printer. Users who are interested doing this should be supposed to have a larger printer.
- Some people said with the help of 250mm spec is the best, this project may agree.
If you have built a shrunk-down or small printer first (i.e. V0, with or no mods, smaller than Spec V1 / VT, V2 or Switchwire, excluding Z height), you may need to build a bigger printer for your bigger projects. Most necessary mod parts can be fit and can be printed on the tiny build plates.
For any other questions you can join Oitswilliam Pang Discord server for the mod packages or VORON Design Discord server on the original elements.
- For V2.3347, Thanks to Razer for making back-side magical flying colors and RealEstate chin RGB possible with Razer Chroma.
- Thanks to VORON Design for the Voron 2 CAD model.