Warning
Warning
Barretenberg (or bb for short) is an optimized elliptic curve library for the bn128 curve, and a PLONK SNARK prover.
- Installation
- Usage
- Development
Caution
This code is highly experimental, use at your own risk!
For an easy installation, follow bbup.
TODO: AztecProtocol/aztec-packages#7600
All available bb commands:
https://github.com/AztecProtocol/aztec-packages/blob/barretenberg-v0.55.0/barretenberg/cpp/src/barretenberg/bb/main.cpp#L1369-L1512
Note
Currently the binary downloads an SRS that can be used to prove the maximum circuit size. This maximum circuit size parameter is a constant in the code and has been set to
Note
For commands which allow you to send the output to a file using -o {filePath}, there is also the option to send the output to stdout by using -o -.
Tip
Follow the Noir Docs for instructions on how to install Noir, write and compile programs, and generate witnesses.
Prove the valid execution of your program:
bb prove_ultra_honk -b ./target/hello_world.json -w ./target/witness-name.gz -o ./target/proofYou can then compute the verification key for your Noir program and verify the proof:
bb write_vk_ultra_honk -b ./target/hello_world.json -o ./target/vk
bb verify_ultra_honk -k ./target/vk -p ./target/proof
If successful, the verification will complete in silence.
The usage with MegaHonk is similar to the above UltraHonk. Refer to all the available bb commands, using the bb <command>_mega_honk syntax.
Warning
MegaHonk generates insecure recursion circuits when Goblin recursive verifiers are not present.
Barretenberg can generate a smart contract that verifies proofs in Solidity (i.e. for usage in EVM chains). This feature is only available for UltraHonk, as the MegaHonk proving system is intended for use with apps deploying on Aztec only.
First, prove the valid execution of your Noir program and export the verification key:
bb prove_ultra_keccak_honk -b ./target/hello_world.json -w ./target/witness-name.gz -o ./target/proof
bb write_vk_ultra_honk -b ./target/hello_world.json -o ./target/vkImportant
prove_ultra_keccak_honk is used to generate UltraHonk proofs with Keccak hashes, making them gas-efficient. prove_ultra_honk in comparison generates proofs with Poseidon hashes, more efficient in recursions but not on-chain verifications.
You can now use the verification key to generate a Solidity verifier contract:
bb contract_ultra_honk -k ./target/vk -c $CRS_PATH -b ./target/hello_world.json -o ./target/Verifier.solCaution
Solidity verifier contracts are work-in-progress. Expect significant optimizations and breaking changes, and do NOT use it in production!
The following packages are required for building from source:
- cmake >= 3.24
- Ninja (used by the presets as the default generator)
- clang >= 16 or gcc >= 10
- clang-format
- libstdc++ >= 12
- libomp (if multithreading is required. Multithreading can be disabled using the compiler flag
-DMULTITHREADING 0)
To install these on Ubuntu, run:
sudo apt-get install cmake clang clang-format ninja-build libstdc++-12-devThe default cmake version on 22.04 is 3.22.1, so it must be updated. You can get the latest version here.
When running MacOS Sonoma 14.2.1 the following steps are necessary:
- update bash with
brew install bash - update cmake
It is recommended to use homebrew llvm on macOS to enable std::execution parallel algorithms. To do so:
- Install llvm with
brew install llvm - Add it to the path with
export PATH="/opt/homebrew/opt/llvm/bin:$PATH"in your shell or profile file.
You can get openMP from package managers. Ex. on Ubuntu:
sudo apt-get install libomp-devOr you can install it from source:
git clone -b release/10.x --depth 1 https://github.com/llvm/llvm-project.git \
&& cd llvm-project && mkdir build-openmp && cd build-openmp \
&& cmake ../openmp -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DLIBOMP_ENABLE_SHARED=OFF \
&& cmake --build . --parallel \
&& cmake --build . --parallel --target install \
&& cd ../.. && rm -rf llvm-project
[!Note] On a fresh Ubuntu Kinetic installation, installing OpenMP from source yields a
Could NOT find OpenMP_C (missing: OpenMP_omp_LIBRARY) (found version "5.0")error when trying to build Barretenberg. Installing from apt worked fine.
The bootstrap script will build both the native and wasm versions of barretenberg:
cd cpp
./bootstrap.shYou can then install the library on your system:
cmake --install buildCMake can be passed various build options on its command line:
-DCMAKE_BUILD_TYPE=Debug | Release | RelWithAssert: Build types.-DDISABLE_ASM=ON | OFF: Enable/disable x86 assembly.-DDISABLE_ADX=ON | OFF: Enable/disable ADX assembly instructions (for older cpu support).-DMULTITHREADING=ON | OFF: Enable/disable multithreading.-DOMP_MULTITHREADING=ON | OFF: Enable/disable multithreading that uses OpenMP.-DTESTING=ON | OFF: Enable/disable building of tests.-DBENCHMARK=ON | OFF: Enable/disable building of benchmarks.-DFUZZING=ON | OFF: Enable building various fuzzers.
If you are cross-compiling, you can use a preconfigured toolchain file:
-DCMAKE_TOOLCHAIN_FILE=<filename in ./cmake/toolchains>: Use one of the preconfigured toolchains.
To build:
cmake --preset wasm
cmake --build --preset wasm --target barretenberg.wasmThe resulting wasm binary will be at ./build-wasm/bin/barretenberg.wasm.
To run the tests, you'll need to install wasmtime.
curl https://wasmtime.dev/install.sh -sSf | bash
Tests can be built and run like:
cmake --build --preset wasm --target ecc_tests
wasmtime --dir=.. ./bin/ecc_testsTo add gtest filter parameters in a wasm context:
wasmtime --dir=.. ./bin/ecc_tests run --gtest_filter=filtertext
For detailed instructions look in cpp/docs/Fuzzing.md
To build:
cmake --preset fuzzing
cmake --build --preset fuzzingFuzzing build turns off building tests and benchmarks, since they are incompatible with libfuzzer interface.
To turn on address sanitizer add -DADDRESS_SANITIZER=ON. Note that address sanitizer can be used to explore crashes.
Sometimes you might have to specify the address of llvm-symbolizer. You have to do it with export ASAN_SYMBOLIZER_PATH=<PATH_TO_SYMBOLIZER>.
For undefined behavior sanitizer -DUNDEFINED_BEHAVIOUR_SANITIZER=ON.
Note that the fuzzer can be orders of magnitude slower with ASan (2-3x slower) or UBSan on, so it is best to run a non-sanitized build first, minimize the testcase and then run it for a bit of time with sanitizers.
To build:
cmake --preset coverage
cmake --build --preset coverageThen run tests (on the mainframe always use taskset and nice to limit your influence on the server. Profiling instrumentation is very heavy):
taskset 0xffffff nice -n10 make test
And generate report:
make create_full_coverage_report
The report will land in the build directory in the all_test_coverage_report directory.
Alternatively you can build separate test binaries, e.g. honk_tests or numeric_tests and run make test just for them or even just for a single test. Then the report will just show coverage for those binaries.
Code is formatted using clang-format and the ./cpp/format.sh script which is called via a git pre-commit hook.
Tip
A default configuration for VS Code is provided by the file barretenberg.code-workspace. These settings can be overridden by placing configuration files in .vscode/.
If you've installed the C++ Vscode extension, configure it to format on save!
Each module has its own tests. e.g. To build and run ecc tests:
# Replace the `default` preset with whichever preset you want to use
cmake --build --preset default --target ecc_tests
cd build
./bin/ecc_testsA shorthand for the above is:
# Replace the `default` preset with whichever preset you want to use
cmake --build --preset default --target run_ecc_testsRunning the entire suite of tests using ctest:
cmake --build --preset default --target testYou can run specific tests, e.g.
./bin/ecc_tests --gtest_filter=scalar_multiplication.*
CI will automatically run integration tests against Aztec. It is located in the barretenberg folder.
When working on a PR, you may want to point this file to a different Aztec branch or commit, but then it should probably be pointed back to master before merging.
A common issue that arises is that our CI system has a different compiler version e.g. namely for GCC. If you need to mimic the CI operating system locally you can use bootstrap_docker.sh or run dockerfiles directly. However, there is a more efficient workflow for iterative development:
cd barretenberg/cpp
./scripts/docker_interactive.sh
mv build build-native # your native build folders are mounted, but will not work! have to clear them
cmake --preset gcc ; cmake --build build
This will allow you to rebuild as efficiently as if you were running native code, and not have to see a full compile cycle.
If doxygen is installed on the system, you can use the build_docs target to build documentation, which can be configured in vscode CMake extension or using
cmake --build . --target build_docsin the cpp/build directory. The documentation will be generated in cpp/docs/build folder. You can then run a python http server in the folder:
python3 -m http.server <port>and tunnel the port through ssh.
Table represents time in ms to build circuit and proof for each test on n threads. Ignores proving key construction.
+--------------------------+------------+---------------+-----------+-----------+-----------+-----------+-----------+
| Test | Gate Count | Subgroup Size | 1 | 4 | 16 | 32 | 64 |
+--------------------------+------------+---------------+-----------+-----------+-----------+-----------+-----------+
| sha256 | 38799 | 65536 | 5947 | 1653 | 729 | 476 | 388 |
| ecdsa_secp256k1 | 41049 | 65536 | 6005 | 2060 | 963 | 693 | 583 |
| ecdsa_secp256r1 | 67331 | 131072 | 12186 | 3807 | 1612 | 1351 | 1137 |
| schnorr | 33740 | 65536 | 5817 | 1696 | 688 | 532 | 432 |
| double_verify_proof | 505513 | 524288 | 47841 | 15824 | 7970 | 6784 | 6082 |
+--------------------------+------------+---------------+-----------+-----------+-----------+-----------+-----------+
+--------------------------+------------+---------------+-----------+-----------+-----------+-----------+-----------+
| Test | Gate Count | Subgroup Size | 1 | 4 | 16 | 32 | 64 |
+--------------------------+------------+---------------+-----------+-----------+-----------+-----------+-----------+
| sha256 | 38799 | 65536 | 18764 | 5116 | 1854 | 1524 | 1635 |
| ecdsa_secp256k1 | 41049 | 65536 | 19129 | 5595 | 2255 | 2097 | 2166 |
| ecdsa_secp256r1 | 67331 | 131072 | 38815 | 11257 | 4744 | 3633 | 3702 |
| schnorr | 33740 | 65536 | 18649 | 5244 | 2019 | 1498 | 1702 |
| double_verify_proof | 505513 | 524288 | 149652 | 45702 | 20811 | 16979 | 15679 |
+--------------------------+------------+---------------+-----------+-----------+-----------+-----------+-----------+
Some modules have benchmarks. The build targets are named <module_name>_bench. To build and run, for example ecc benchmarks.
# Replace the `default` preset with whichever preset you want to use
cmake --build --preset default --target ecc_bench
cd build
./bin/ecc_benchA shorthand for the above is:
# Replace the `default` preset with whichever preset you want to use
cmake --build --preset default --target run_ecc_benchThe CircuitChecker::check_circuit function is used to get the gate index and block information about a failing circuit constraint. If you are in a scenario where you have a failing call to check_circuit and wish to get more information out of it than just the gate index, you can use this feature to get a stack trace, see example below.
Usage instructions:
- On ubuntu (or our mainframe accounts) use
sudo apt-get install libdw-devto support trace printing - Use
cmake --preset clang16-dbg-fast-circuit-check-tracesandcmake --build --preset clang16-dbg-fast-circuit-check-tracesto enable the backward-cpp dependency through the CHECK_CIRCUIT_STACKTRACES CMake variable. - Run any case where you have a failing check_circuit call, you will now have a stack trace illuminating where this constraint was added in code.
Caveats:
- This works best for code that is not overly generic, i.e. where just the sequence of function calls carries a lot of information. It is possible to tag extra data along with the stack trace, this can be done as a followup, please leave feedback if desired.
- There are certain functions like
assert_equalsthat can cause gates that occur before them to fail. If this would be useful to automatically report, please leave feedback.
Example:
[ RUN ] standard_circuit_constructor.test_check_circuit_broken
Stack trace (most recent call last):
#4 Source "_deps/gtest-src/googletest/src/gtest.cc", line 2845, in Run
2842: if (!Test::HasFatalFailure() && !Test::IsSkipped()) {
2843: // This doesn't throw as all user code that can throw are wrapped into
2844: // exception handling code.
>2845: test->Run();
2846: }
2847:
2848: if (test != nullptr) {
#3 Source "_deps/gtest-src/googletest/src/gtest.cc", line 2696, in Run
2693: // GTEST_SKIP().
2694: if (!HasFatalFailure() && !IsSkipped()) {
2695: impl->os_stack_trace_getter()->UponLeavingGTest();
>2696: internal::HandleExceptionsInMethodIfSupported(this, &Test::TestBody,
2697: "the test body");
2698: }
#2 | Source "_deps/gtest-src/googletest/src/gtest.cc", line 2657, in HandleSehExceptionsInMethodIfSupported<testing::Test, void>
| 2655: #if GTEST_HAS_EXCEPTIONS
| 2656: try {
| >2657: return HandleSehExceptionsInMethodIfSupported(object, method, location);
| 2658: } catch (const AssertionException&) { // NOLINT
| 2659: // This failure was reported already.
Source "_deps/gtest-src/googletest/src/gtest.cc", line 2621, in HandleExceptionsInMethodIfSupported<testing::Test, void>
2618: }
2619: #else
2620: (void)location;
>2621: return (object->*method)();
2622: #endif // GTEST_HAS_SEH
2623: }
#1 Source "/mnt/user-data/adam/aztec-packages/barretenberg/cpp/src/barretenberg/circuit_checker/standard_circuit_builder.test.cpp", line 464, in TestBody
461: uint32_t d_idx = circuit_constructor.add_variable(d);
462: circuit_constructor.create_add_gate({ a_idx, b_idx, c_idx, fr::one(), fr::one(), fr::neg_one(), fr::zero() });
463:
> 464: circuit_constructor.create_add_gate({ d_idx, c_idx, a_idx, fr::one(), fr::neg_one(), fr::neg_one(), fr::zero() });
465:
466: bool result = CircuitChecker::check(circuit_constructor);
467: EXPECT_EQ(result, false);
#0 Source "/mnt/user-data/adam/aztec-packages/barretenberg/cpp/src/barretenberg/stdlib_circuit_builders/standard_circuit_builder.cpp", line 22, in create_add_gate
19: {
20: this->assert_valid_variables({ in.a, in.b, in.c });
21:
> 22: blocks.arithmetic.populate_wires(in.a, in.b, in.c);
23: blocks.arithmetic.q_m().emplace_back(FF::zero());
24: blocks.arithmetic.q_1().emplace_back(in.a_scaling);
25: blocks.arithmetic.q_2().emplace_back(in.b_scaling);
gate number4
It can be quite hard to make sense of field_t circuit values that indirectly reference their contents, and even plain field values that are typically in montgomery form. In command-line LLDB or VSCode debug console, run:
command script import ~/aztec-packages/barretenberg/cpp/scripts/lldb_format.py
Now when you print things with e.g. print bigfield_t.get_value() or inspect in VSCode (if you opened the debug console and put in these commands) then you will get pretty-printing of these types. This can be expanded fairly easily with more types if needed.
See Tracy manual linked here https://github.com/wolfpld/tracy for in-depth Tracy documentation.
The basic use of Tracy is to run a benchmark with the cmake --preset tracy build type, create a capture file, then
transfer it to a local machine for interactive UI introspection.
All the steps to do this effectively are included in various scripts in cpp/scripts/.
