Strange ESP log

[jirkaherzig]

Hi all,

I was trying to update to newer version today. From 0.9.53 to 0.9.58. (Bridge and monitor)
I do not know what happened, but I had to reflash the ESP with the programming module.

Now I am back on 0.9.53 as it worked for me. Oh, and I have the EKHBRD Daikin.

But, the problem is that now I am getting spam in P1P2/S/P1P2MQTT/bridge0
and also in the telnet.

Telnet is still repeating this:

[ESP] 2025-01-05 17:05:21 Unknown packetSrc 0x80 packetType 0x18 index 4
[ESP] 2025-01-05 17:05:21 Unknown packetSrc 0x80 packetType 0x18 index 5
[ESP] 2025-01-05 17:05:22 Unknown packetSrc 0x80 packetType 0x18 index 0
[ESP] 2025-01-05 17:05:22 Unknown packetSrc 0x80 packetType 0x18 index 1
[ESP] 2025-01-05 17:05:22 Unknown packetSrc 0x80 packetType 0x18 index 2
[ESP] 2025-01-05 17:05:22 Unknown packetSrc 0x80 packetType 0x18 index 3
[ESP] 2025-01-05 17:05:22 Unknown packetSrc 0x80 packetType 0x18 index 4
[ESP] 2025-01-05 17:05:22 Unknown packetSrc 0x80 packetType 0x18 index 5
[ESP] 2025-01-05 17:05:24 Unknown packetSrc 0x80 packetType 0x18 index 0
[ESP] 2025-01-05 17:05:24 Unknown packetSrc 0x80 packetType 0x18 index 1
[ESP] 2025-01-05 17:05:24 Unknown packetSrc 0x80 packetType 0x18 index 2
[ESP] 2025-01-05 17:05:24 Unknown packetSrc 0x80 packetType 0x18 index 3
[ESP] 2025-01-05 17:05:24 Unknown packetSrc 0x80 packetType 0x18 index 4
[ESP] 2025-01-05 17:05:24 Unknown packetSrc 0x80 packetType 0x18 index 5
[ESP] 2025-01-05 17:05:25 Unknown packetSrc 0x80 packetType 0x18 index 0
[ESP] 2025-01-05 17:05:25 Unknown packetSrc 0x80 packetType 0x18 index 1
[ESP] 2025-01-05 17:05:25 Unknown packetSrc 0x80 packetType 0x18 index 2
[ESP] 2025-01-05 17:05:25 Unknown packetSrc 0x80 packetType 0x18 index 3

Did i do something wrong? Any idea what it can be?
Thank you.
Jirka

[Arnold-n]

These messages are harmless and will be resolved in a future version. I think they were present in previous versions too. Where there any other issues with v0.9.58 after updating via the USB programmer?

[jirkaherzig]

I am not sure, if it was present in my previous version 0.9.53, but I think it was not, as I could not see it in the mqtt topic. I woud notice as it is a lot of messages in a day. It is 518k messages a day :D
Is there any option to turn this one off? I turned it off with J0 , but that turn off the whole mqtt, right?

0.9.58 was upgraded via http and then it crashed. I had to flash the 0.9.53 as I knew, it worked. Can try it today if you want :-)

[Arnold-n]

J0 would make the bridge pretty useless, indeed. My bad, bug causing these messages found, solved in P1P2MQTT-bridge v0.9.58rc8 for E-series. If you could try to upload it via the firmware, that would be great - if it crashes your bridge I need to remove firmware and find the issue. On my end it uploads OTA (esptools or webserver) without issues.

[jirkaherzig]

Wow, thank you!
This one works great. Got updated via webserver.
the previous log is gone, but now it says this:

[ESP] 2025-01-06 17:59:06 Restart phase 0
[ESP] 2025-01-06 17:59:13 Restart phase 0
[ESP] 2025-01-06 17:59:20 Restart phase 0
[ESP] 2025-01-06 17:59:26 Restart phase 0
[ESP] 2025-01-06 17:59:33 Restart phase 0
[ESP] 2025-01-06 17:59:40 Restart phase 0
[ESP] 2025-01-06 17:59:46 Restart phase 0
[ESP] 2025-01-06 17:59:53 Restart phase 0
[ESP] 2025-01-06 18:00:00 Restart phase 0
[ESP] 2025-01-06 18:00:07 Restart phase 0
[ESP] 2025-01-06 18:00:13 Restart phase 0
[ESP] 2025-01-06 18:00:20 Restart phase 0
[ESP] 2025-01-06 18:00:27 Restart phase 0
[ESP] 2025-01-06 18:00:33 Restart phase 0
[ESP] 2025-01-06 18:00:40 Restart phase 0
[ESP] 2025-01-06 18:00:47 Restart phase 0
[ESP] 2025-01-06 18:00:53 Restart phase 0
[ESP] 2025-01-06 18:01:00 Restart phase 0

topic P1P2/P/P1P2MQTT/bridge0/U/B/
without changes

RestartPhase3bitPattern = 0xF8FFFF
RestartPhase3bitPatternNr = 0x04
RestartPhase5data1 = 0xD261E0
RestartPhase5data2 = 0xD261

It looks like repeating each 6 - 7 sec.
This one is much better that the previous, though :-)

Otherwise, no issues wit 0.9.58rc8.
Some temperature data are still wierd, but I can understand that it needs more work (from me as well :-) )

Thank you.

[Arnold-n]

Thanks, great. The "Restart phase 0" means you have a recurring message xxxx00*, can you have a check (J33 / observe telnet or P1P2/R/# / J2) to see its length and if it is worthwhile add decoding for this?

[jirkaherzig]

I am sorry, but I am not sure I understand what we are looking for :-)
so, there is output from the telnet here:
putty.log

is this enough?

[Arnold-n]

Yes, thanks. I'll remove the spam in the next version v0.9.58rc10.