added 'how to' for loading and using FPGA binaries

README.md

@@ -6,9 +6,19 @@ Infinite-ISP is a one stop solution for all your ISP development needs - from al
 | **[Infinite-ISP_AlgorithmDesign](https://github.com/xx-isp/infinite-isp)**                        | Python based model of the Infinite-ISP pipeline for algorithm development |
 | **[Infinite-ISP_ReferenceModel](https://github.com/10xEngineersTech/Infinite-ISP_ReferenceModel)**                       | Python based fixed-point model of the Infinite-ISP pipeline for hardware implementation |
 | **[Infinite-ISP_FPGA_Binaries](https://github.com/10xEngineersTech/Infinite-ISP_FPGA_Binaries)** :anchor:                                     | FPGA binaries for the Kria KV260’s Xilinx® XCK26 Ultrascale FPGA|
-| **[Infinite-ISP_Firmware](https://github.com/10xEngineersTech/Infinite-ISP_Firmware)**                                      | Firmware for the Kria kV260’s embedded Arm® Cortex®A53 processor|
+| **[Infinite-ISP_Firmware](https://github.com/10xEngineersTech/Infinite-ISP_Firmware)**                                      | Firmware for the Kria KV260’s embedded Arm® Cortex®A53 processor|
 | **[Infinite-ISP_Tuning Tool](https://github.com/10xEngineersTech/Infinite-ISP_TuningTool)**                              | Collection of calibration and analysis tools for the Infinite-ISP |
 
 
 # Infinite-ISP_FPGA_Binaries
 Infinite-ISP Image Signal Processing Pipeline FPGA binaries for XCK26 Zynq® UltraScale+™ MPSoC present on Xilinx® Kria™ KV260 Vision AI Starter Kit
+
+# How to use the FPGA Binary Files
+1. Connect AR1335 IAS image sensor module (included in Xilinx Kria KV260 Accessory Pack) to the IAS1 port on Kria KV260 AI Starter Kit.
+2. Insert SD Card (2GB or above) into the Kria KV260 board.
+3. Connect the Kria KV260 board with a monitor screen using HDMI cable.
+4. Power up the Kria KV260 board and follow the [steps](https://docs.xilinx.com/r/en-US/ug1089-kv260-starter-kit/Ethernet-Recovery-Tool) for loading the on-board Xilinx Image Recovery Tool.
+5. Upload the desired binary file (e.g. 'Infinite-ISP_v1.0-1080p.bin') on the Kria KV260 AI Starter Kit.
+6. Reset the Kria KV260 board and visualize the Infinite-ISP output on your monitor screen.
+7. Connect the USB cable with the JTAG/USB port on Kria to read the messages over UART.
+8. You can remove the SD card from the Kria board, extract the dumped single RGB-RAW pair and 300 RGB frames (if applicable) and visualize them using the provided scripts.